The one light source that must work when everything else fails is the green exit sign. Because the human eye peaks around 555 nm, a 515–525 nm green LED delivers more perceived brightness per watt than red or blue at the same drive current — exactly the margin battery-backed emergency luminaires need. The 2835 Green SMD LED from Dongguan Lanjin Optoelectronics Co., Ltd. is built around that physics: a 2.8 × 3.5 × 0.8 mm top-view package that pushes 10–30 lm at only 0.2 W.
International wayfinding conventions reserve green for safe conditions, exits and escape routes, while red marks prohibition and fire equipment. That convention is also practical: at equal electrical input the 2835 green chip reads brighter to the human eye than a red emitter, so a sign can hit the required luminance with fewer chips, a smaller heat sink and a smaller battery pack. In smoke-filled corridors a narrow 515–525 nm band stays clearly recognisable instead of washing out into a pale glow.
| Parameter | Specification |
|---|---|
| Model | 2835 Green SMD LED (top view) |
| Package size | 2.8 × 3.5 × 0.8 mm |
| Wavelength | 515–525 nm green |
| Power / current | 0.2 W / 60 mA |
| Forward voltage | 2.8–3.4 V |
| Luminous flux | 10–30 lm |
| Viewing angle | 120° |
| Lifetime / warranty | 50,000 hours / 2 years |
| Operating temperature | −40 °C to +85 °C |
| Reel / MOQ | 4,000 pcs per reel / MOQ 4,000 pcs |
| Chip / compliance | San'an chip, RoHS & Reach, 500 KK/month |
Single- and double-sided “running man” luminaires run 8–20 green emitters behind a diffuser on a small battery pack. Because the 2835 delivers usable flux at 60 mA, a sign can reach 3-hour autonomy with a smaller, cheaper cell — a decisive lever for OEMs bidding on large projects.
Low-mounted wayfinding strips guide occupants underneath a smoke layer. Their long, narrow light guides reward a thin 0.8 mm package and a 120° Lambertian beam that couples evenly into the guide without hot spots.
The classic green pharmacy cross and window neon replacement run on the same wavelength. 515–525 nm sits right in the recognisable “medical green” range, and the 2.8 × 3.5 mm footprint lets module makers pack 3–6 chips per segment for an edge-lit acrylic face.
Machine guard indicators, conveyor start warnings and clean-room status towers need a green that reads instantly through polycarbonate lenses. The wide −40 to +85 °C range covers unheated warehouses and outdoor cabinets alike.
Bus and metro door indicators, lift panels and hospital wayfinding boards use dense arrays of small green pixels. Constant current driving keeps brightness matched across segments, so panels show no visible “stripes” after years of service.
| Application | Typical chip count | Drive arrangement |
|---|---|---|
| Exit sign (single side) | 8–12 pcs | 3S3P, 12 V battery rail |
| Escape route strip | 20–60 pcs / m | Constant current, 24 V |
| Pharmacy cross | 3–6 pcs per segment | 12 V with series resistor |
| Machine status tower | 6–15 pcs per lens | 24 V, PWM dimming |
Dongguan Lanjin Optoelectronics Co., Ltd. produces this 515–525 nm green chip alongside its 2835, 3030, 3528, 5050 and 5730 families, with 500 KK monthly capacity and 5–15 day delivery. Every reel of 4,000 pcs ships anti-static bagged and carton protected, uses San'an chips, is RoHS and Reach compliant, and carries a two-year warranty. The MOQ starts at 4,000 pcs, so sign makers can buy production quantities without committing to a full panel, while OEM/ODM customers can request matched resistor values for 5 V, 12 V and 24 V boards.
Building an exit sign programme?
Send your sign size, segment count and backup voltage to the Lanjin team for a matched 2835 sample reel, wavelength bin report and drive calculation.
Kontak Person: Miss. Ava Huang
Tel: +86 18819512052
Faks: 86-0769-89616935